Kabels en Adapters/Energie/Stekkers

SmartLife Slimme Stekker

Wi-Fi | Energiemeter | 2500 W | Randaarde stekker / Type F (CEE 7/7) | -10 - 40 °C | Android™ / IOS | Wit | 1 Stuks

Kenmerken

Artikelcode fabrikant: WIFIP110FWT
EAN-nummer: 5412810269945
• Kan worden gebruikt als een op zichzelf staand product of eenvoudig worden aangesloten op andere Nedis® SmartLife-producten
• Biedt de mogelijkheid voorautomatische bediening op afstand - voor tijdschema’s en koppelen met apparaten
• Ondersteunt spraakbediening- in combinatie met Amazon Alexa of Google Home
• Slank ontwerp - om ervoor te zorgen dat aangrenzende stopcontacten niet worden geblokkeerd
Bedien allerlei elektrische apparaten op afstand door ze eenvoudigweg op deze draadloze smart plug aan te sluiten en via een Wi-Fi-router met je smartphone of tablet te verbinden. Met de handige stroommeter kun je in één oogopslag precies zien hoeveel stroom het apparaat op dat moment verbruikt, of hoeveel stroom het heeft verbruikt door de tijd.

Eenvoudig te installeren
Je hoeft geen technisch talent te hebben of een elektricien te zijn om de aangesloten apparaten en toestellen te bedienen en automatisch te laten werken. Alles wat je nodig hebt, is een smart plug en een Wi-Fi-router. Onze intuïtieve app biedt je de mogelijkheid apparaten op afstand en automatisch in- en uit te schakelen. Het systeem kan zelfs werken in verbinding met spraakbedieningsystemen zoals Amazon Alexa of Google Home.

Superslank - geen geblokkeerde stopcontacten meer
Deze zeer slanke apparaten zijn ontworpen ter voorkoming van het veelvoorkomende probleem van slimme stekkers die aangrenzende stopcontacten blokkeren - onze stekkers zijn zowel slim als slank voor je gebruiksgemak.

Plan en koppel
Maak tijdschema’s voor het inschakelen van de stekker op apparaten of koppel ze aan andere om een sfeer in een ruimte te creëren die geactiveerd kan worden met een enkele opdracht of via een druk op een knop.

Bewaak stroomverbruik
Signaleer in één oogopslag apparaten die buitensporig veel stroom verbruiken om ervoor te zorgen dat je in een slimme en energiezuinige woning woont.

Over Nedis SmartLife
Ontdek een breed en continu groeiend assortiment producten, zoals gloeilampen, schakelaars, contactdozen, sensoren en camera’s, die allemaal kunnen worden bediend met een eenvoudig te gebruiken en intuïtieve app. Met functies voor spraakbediening ondersteund door Amazon Alexa en Google Home, en verder niets meer dan een bestaand Wi-Fi-netwerk, is dit het verbonden smart home vereenvoudigd.
Of je nu op zoek bent naar één slimme lamp of stopcontact, of je hele woning wilt automatiseren, ontdek hoe toegankelijk slimme technologie tegenwoordig is.

Verpakking

Inhoud verpakking

Slim stopcontact
Snelstartgids

Verpakkingsafmetingen Cadeaubox met eurolock

Breedte Hoogte Lengte
105 mm 125 mm 63 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 65 mm 150 mm 110 mm 107 g
50 345 mm 285 mm 560 mm 6000 g

Productspecificaties

Breedte 45 mm
Hoogte 70 mm
Diepte 45 mm
Gewicht 57 g
Kleur Wit
Materiaal Kunststof
Geschikt voor Nedis® SmartLife
Maximale antenne versterking 1.5 dBi
Maximaal zendvermogen 14 dBm
Energiemeter Ja
Apparaat stroominput Hybrid (CEE 7/7)
Uitgangsvermogen 2500 W
Ingangsstroom 10 A
App beschikbaar voor Android™
IOS
Zendfrequentie 2412 - 2472 MHz
Stekkertype Type-F (CEE 7/7)
Type verpakking Gift Box met Euro Lock
Ondersteunde draadloze technologie Wi-Fi
Uitgangsstroom 10 A
Aantal producten in verpakking 1 Stuks
Bedrijfstemperatuurbereik -10 - 40 °C
Apparaat stroomoutput Randaarde stekker / Type F (CEE 7/7)
Soort aarding Randaarde stekker
Ingangsvoltage 230 V AC

Ondersteuning

Veelgestelde vragen

Een automatisering kan worden gebruikt om een bepaalt "gebeurtenis" (condition), als een trigger te gebruiken voor een aktie (Task).
Een gebeurtenis kan van alles zijn zoals Bewegings detectie, tijd, temperatuur, zonsopkomst ect.
Zo kunt u een automatisering maken dat als de zon ondergaat de lampen aangaan, u de Smartplugs aanzet of een combinatie van verschillende akties.

Ja dat is mogelijk.

Ieder persoon dient een account aan te maken in de SmartLife app.
Om deze personen toe te voegen als familie volg dan onderstaande stappen:

Klik linksboven op de naam van uw huis in het hoofdscherm.
Selecteer beheer huis, klik opnieuw op de naam van uw huis.
Hier ziet u uw instellingen van uw huis zoals aantal kamers, lokatie ect.
Klik hier daaronder onder de kop Familieleden op "Leden toevoegen".
Dit geeft de persoon toegang tot al uw SmartLife producten.

Wilt u een persoon alleen toegang geven tot 1 bepaald product, ga naar instellingen van het bepaalde product en selecteer "Apparaat delen" klik op toevoegen.

Dit is waarschijnlijk een wifi probleem die verschillende oorzaken kan hebben:

1.) Wifi signaal is instabiel
2.) Wifi signaal is te zwak
3.) Using an access point with the same SSID and Password that do not support IEEE802.11R standaard.

Probleem 1 kan vaak opgelost worden door uw router te herstarten.

Probleem 2 kan worden opgelost door een met een app Wifi analyzer uw signaal te controleren en eventueel om van kanaal op uw router in te stellen.

Probleem 3 Dit kunt u controleren door acces points en versterkers uit te schakelen. Als de producten dan weer online komen dan zijn de acces points en versterkers een probleem. We raden u dan aan om een Mesh systeem te gebruiken die de IEE802.11R ondersteunen (wifi6)

Wij hebben voor u de volgende vragen gevonden in het Engels

Go to the settings menu of the plug > remove device and data
Then go to Profile > settings > clear cache
Now reset the plug and add it back to the app

Please try the AP mode.

Make sure that you use a 2.4Ghz wifi network.

Reset the plug so it blinks slow.

If it blinks fast, reset it again and it will blink slowly



In the app:

+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.



Hold your phone very close to the plug during the installation

This method uses a direct connection to the device to send the info of your wifi to it.

Holding it close optimises this connection

Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.

Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

You can add maximum 20 members.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.