Verlichting/Decoratief/LED Strips

SmartLife LED Strip

Wi-Fi | Koel Wit / RGB / Warm Wit | SMD | 5.00 m | IP44 | 2700 - 6500 K | 960 lm | Android™ / IOS

Kenmerken

Artikelcode fabrikant: WIFILS50CRGBW
EAN-nummer: 5412810303106
• Gemakkelijk in te stellen - simpelweg aansluiten op je WiFi om deze ledstrip in te stellen, te regelen en te programmeren
• Rode, groene en blauwe verlichting mogelijk, of een tint tussen warm- en koudwit - perfect aan je stemming aan te passen
• De lengte van 5 meter kan worden ingekort of verlengd - voor eindeloze mogelijkheden
• Dubbelzijde lijmstrip (3M) al aangebracht - voor gemakkelijke bevestiging
• Werkt als slimme standalone lamp - kan ook met andere SmartLife-producten worden gecombineerd om een complete slimme woning te creëren
Gebruik deze slimme ledstrip om in elke ruimte de sfeer te bepalen. Regel hem in de Nedis SmartLife-app, stel schema's of automatische programma's in, of gebruik je favoriete spraakassistent om de helderheid en de kleur van de ledstrip te regelen. Hij wordt direct op je WiFi aangesloten, dus geen aparte hub nodig.
Deze ledstrip combineert RGB en warm- en koudwit. Je kunt dus niet alleen je favoriete kleur instellen, maar ook warme of koude indirecte verlichting
De lengte van 5 meter kan worden ingekort of verlengd met vergelijkbare ledstrip, voor eindeloze mogelijkheden
De dubbelzijdige lijmstrip (3M) is al aangebracht voor gemakkelijke bevestiging op elk schoon en vlak oppervlak.

Verpakking

Inhoud verpakking

RGBW ledstrip (5 m)
WiFi-controller
Voeding
Snelstartgids

Verpakkingsafmetingen Cadeaubox met eurolock

Breedte Hoogte Lengte
50 mm 190 mm 185 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 182 mm 50 mm 210 mm 420 g
8 195 mm 245 mm 420 mm 3720 g
32 410 mm 440 mm 510 mm 16000 g

Productspecificaties

Breedte 151 mm
Hoogte 8 mm
Diepte 5000 mm
Gewicht 310 g
Ingangsvoltage 220 - 240 V AC 50/60 Hz
Maximale antenne versterking 2.5 dBi
Geschikt voor Nedis® SmartLife
Kabellengte voedingsadapter 1.50 m
Maximaal zendvermogen 16 dBm
Kleurweergave-index (Ra) 80
Lichtkleur Warm Wit
Koel Wit
RGB
App beschikbaar voor Android™
IOS
IP-codering IP44
Maximale stroomverbruik 15 W
Stekkertype Euro (CEE 7/16)
Dimbaar Ja
Ondersteunde draadloze technologie Wi-Fi
Op maat te knippen Ja
Energieverbruik per 1000 uur 15 kWh
Materiaal Siliconen
Montage Wandmontage
Verlengbare lichtstrip Ja
Zendfrequentie 2412 - 2484 MHz
Aantal producten in verpakking 1 Stuks
Apparaat stroominput DC
Nominale levensduur lamp 20000 u
Kleurtemperatuur 2700 - 6500 K
Energieklasse F
Nominale lichtstroom 960 lm
Kleur Multicolour
Lengte snoer 5.00 m
LED Type SMD
LED-module SMD 5050
Aantal leds per meter 90 Stuks

Ondersteuning

Veelgestelde vragen

Ja dat is mogelijk.

Ieder persoon dient een account aan te maken in de SmartLife app.
Om deze personen toe te voegen als familie volg dan onderstaande stappen:

Klik linksboven op de naam van uw huis in het hoofdscherm.
Selecteer beheer huis, klik opnieuw op de naam van uw huis.
Hier ziet u uw instellingen van uw huis zoals aantal kamers, lokatie ect.
Klik hier daaronder onder de kop Familieleden op "Leden toevoegen".
Dit geeft de persoon toegang tot al uw SmartLife producten.

Wilt u een persoon alleen toegang geven tot 1 bepaald product, ga naar instellingen van het bepaalde product en selecteer "Apparaat delen" klik op toevoegen.

Dit is waarschijnlijk een wifi probleem die verschillende oorzaken kan hebben:

1.) Wifi signaal is instabiel
2.) Wifi signaal is te zwak
3.) Using an access point with the same SSID and Password that do not support IEEE802.11R standaard.

Probleem 1 kan vaak opgelost worden door uw router te herstarten.

Probleem 2 kan worden opgelost door een met een app Wifi analyzer uw signaal te controleren en eventueel om van kanaal op uw router in te stellen.

Probleem 3 Dit kunt u controleren door acces points en versterkers uit te schakelen. Als de producten dan weer online komen dan zijn de acces points en versterkers een probleem. We raden u dan aan om een Mesh systeem te gebruiken die de IEE802.11R ondersteunen (wifi6)

Wij hebben voor u de volgende vragen gevonden in het Engels

No, the LED's are not individually addressable.

Please try the AP mode.

Make sure that you use a 2.4Ghz wifi network.

Reset the controller so the LED strip blinks slow. (press and hold the button on the controller)

If it blinks fast, reset it again and it will blink slowly



In the app:

+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.



Hold your phone very close to the plug during the installation

This method uses a direct connection to the device to send the info of your wifi to it.

Holding it close optimises this connection

Ensure that you only take off the plastic protection and not the entire adhesive strip.
If you remove the whole strip, you will not be able to stick it to anything.

Yes, you can purchase another set and plug the second strip in the first one.
If you extend it to 10m (5m extra) then you might see some loss in brightness at the end of the second strip.
We recommend you install multiple complete sets and group them in the app.
Now you can control all of the strips as if they are a single strip without any loss in brightness.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.