Striscia LED SmartLife
Wi-Fi | Bianco caldo / Bianco freddo / RGB | SMD | 5.00 m | IP44 | 2700 - 6500 K | 960 lm | Android™ / IOS
Funzioni
• Sono disponibili i colori rosso, verde e blu o è possibile selezionare una tonalità bianca calda o fredda per adattare perfettamente la luce al tuo umore
• La striscia può essere accorciata o estesa per infinite possibilità
• Nastro biadesivo (3M) già posizionato per una facile installazione
• Funziona come lampadina smart autonoma o associata ad altri prodotti SmartLife per una casa interamente smart
Questa striscia LED combina LED RGB e LED a luce bianca calda e fredda: non solo è possibile impostare il proprio colore preferito, ma anche utilizzarla per illuminazione indiretta calda e fredda
La sua lunghezza di 5 metri può essere accorciata o estesa con strisce LED simili per infinite possibilità
Il biadesivo (3M) è già posizionato, per una facile installazione su qualsiasi superficie pulita e piana.
Imballaggio
Contenuto della confezione
Striscia LED RGBW (5 m)
Controller Wi-Fi
Alimentatore
Guida di avvio rapido
Dimensioni e peso del prodotto Scatola regalo con eurolock
Larghezza | Altezza | Lunghezza |
---|---|---|
50 mm | 190 mm | 185 mm |
Dimensioni e peso della confezione
Confezioni da | Larghezza | Altezza | Lunghezza | Peso |
---|---|---|---|---|
1 | 182 mm | 50 mm | 210 mm | 420 g |
8 | 195 mm | 245 mm | 420 mm | 3720 g |
32 | 410 mm | 440 mm | 510 mm | 16000 g |
Specifiche del prodotto
Larghezza |
151 mm |
Altezza |
8 mm |
Profondità |
5000 mm |
Peso |
310 g |
Tensione d'entrata |
220 - 240 V AC 50/60 Hz |
Guadagno massimo dell'antenna di trasmissione |
2.5 dBi |
Compatibile con |
Nedis® SmartLife |
Lunghezza del cavo dell'adattatore di alimentazione |
1.50 m |
Massima potenza di trasmissione |
16 dBm |
Indice di resa cromatica (Ra) |
80 |
Colore della luce |
Bianco freddo Bianco caldo RGB |
App disponibile per |
Android™ IOS |
Protezione ingresso |
IP44 |
Assorbimento massimo |
15 W |
Presa di corrente |
Euro (CEE 7/16) |
Dimmerabile |
Sì |
Durata nominale delle lampade |
20000 h |
Tecnologia wireless supportata |
Wi-Fi |
Tagliabile |
Sì |
Consumo di energia per 1000 ore |
15 kWh |
Materiali |
Silicone |
Supporto |
Montaggio superficie |
Striscia luminosa estensibile |
Sì |
Trasmissione gamma di frequenza |
2412 - 2484 MHz |
Numero di prodotti nel pacco |
1 pz. |
Collegamento / i di ingresso dell'alimentazione del dispositivo |
DC |
Temperatura colore |
2700 - 6500 K |
Classe energetica |
F |
Flusso luminoso nominale |
960 lm |
Colore |
Multicolore |
Lunghezza del cavo |
5.00 m |
Tipo di LED |
SMD |
Modulo LED |
SMD 5050 |
Numero di led per metro |
90 pz. |
Supporto
Domande frequenti
Abbiamo trovato le seguenti domande per te in inglese
Can the strip light up in multiple colours at the same time?
No, the LED's are not individually addressable.
My LED strip does not want to install with the EZ mode installation.
Please try the AP mode.
Make sure that you use a 2.4Ghz wifi network.
Reset the controller so the LED strip blinks slow. (press and hold the button on the controller)
If it blinks fast, reset it again and it will blink slowly
In the app:
+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.
Hold your phone very close to the plug during the installation
This method uses a direct connection to the device to send the info of your wifi to it.
Holding it close optimises this connection
Can I just take the adhesive strip off?
Ensure that you only take off the plastic protection and not the entire adhesive strip.
If you remove the whole strip, you will not be able to stick it to anything.
Can I extend the strip?
Yes, you can purchase another set and plug the second strip in the first one.
If you extend it to 10m (5m extra) then you might see some loss in brightness at the end of the second strip.
We recommend you install multiple complete sets and group them in the app.
Now you can control all of the strips as if they are a single strip without any loss in brightness.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.