Télécommande universelle
Préprogrammée | 10 Appareils | Boutons de mémoire / TV Guide Button | Infrarouge | Noir
Caractéristiques
• Plug And Play
Si les piles sont remplacées dans les 20 minutes, il n'est pas nécessaire de reprogrammer la télécommande car toutes les données sont conservées pendant 20 minutes maximum.
Emballage
Contenu de l'emballage
Remote control
Manual
Dimensions emballage retail Blister
Largeur | Hauteur | Longueur |
---|---|---|
240 mm | 240 mm | 40 mm |
Dimensions logistiques
Conditionné par | Largeur | Hauteur | Longueur | Poids |
---|---|---|---|---|
1 | 170 mm | 248 mm | 40 mm | 131 g |
100 | 485 mm | 270 mm | 610 mm | 14220 g |
Spécifications du produit
Largeur |
200 mm |
Hauteur |
50 mm |
Profondeur |
30 mm |
Poids |
74 g |
Couleur |
Noir |
Matériau |
ABS Caoutchouc |
Type de source d'alimentation |
Alimenté par pile |
Tension d'entrée |
3 V DC |
Alimentation par batterie |
AAA |
Technologie de transmission |
Infrarouge |
Appareils adapté |
TV Récepteur DVB-S / S2 Multimédia |
Type de télécommande |
Universel |
Saisie du code |
Préprogrammée |
Fonctionnalités de télécommande |
TV Guide Button Boutons de mémoire |
Piles requises (non incluses) |
2x AAA/LR03 |
Nombre d'appareils |
10 Appareils |
Assistance
Questions fréquemment posées
Nous avons trouvé les questions suivantes pour vous en anglais
I can't find a working code for my device.
Use the automatic search to find a working code.
1. Switch on the home appliance you wish to control. Place the remote control directly
at the home appliance, for example your TV.
2. Press and hold the “TV” button; the indicator light will light up.
3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the
indicator light lights up. Then release both buttons (the indicator light will switch off
and then on again).
4. Press and hold the “POWER” button until the TV set is switched off. Release the
“POWER” button immediately.
5. Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 5 until
you have found the right code.