Seguridad y Protección/Cámaras/Cámaras Exterior

Cámara al Aire Libre SmartLife

Wi-Fi | Full HD 1080p | Inclinación | IP65 | Almacenamiento en la Nube (opcional) / 16GB interno | 12 V DC | Con sensor de movimiento | Visión nocturna | Blanco

Características

Código del proveedor: WIFICO20CWT
Código EAN: 5412810290062
• Cámara IP inteligente para exteriores que ofrece un sistema de seguridad fácil de instalar y conectado de forma inalámbrica para el exterior de una propiedad.
• Resolución Full HD para obtener grabaciones perfectamente nítidas
• Conexión directa y sencilla a su red Wi-Fi, sin necesidad de un concentrador adicional
• Incluye soporte de montaje
• Totalmente compatible con el resto de los productos de la gama SmartLife de Nedis.
La automatización del hogar es ahora más fácil. Esta cámara IP inteligente para exteriores es fácil de usar y puede conectarse de forma sencilla a su red Wi-Fi existente para controlar las zonas exteriores de su hogar y captar cualquier sonido o movimiento.

Resolución Full HD
Graba en Full HD (1920x1080 píxeles) para que las imágenes tengan una excelente nitidez. Además, la cámara es igual de potente por la noche: con su modo de visión nocturna ofrece un rango de 15,0 m.

Impermeables
Completamente cubierta por una resistente carcasa impermeable, esta cámara IP cuenta con una gran memoria interna de 16 GB.

Nitidez
La cámara se activa al detectar sonido o movimiento y graba vídeos e imágenes en Full HD a 1920x1080 píxeles gracias a su sensor CMOS de 1/3" con una resolución óptima.

Comunicación bidireccional
Es posible hablar y escuchar a través de la cámara gracias a su comunicación bidireccional que permite utilizarla de forma similar a un teléfono dentro del alcance máximo.

Fácil de colocar
Incluye un soporte de montaje y una guía de inicio rápido para instalarla en muy poco tiempo.

Acerca de SmartLife de Nedis
Descubra una amplia gama de productos en expansión (con bombillas, interruptores, enchufes, sensores y cámaras) que pueden controlarse mediante una aplicación fácil de utilizar e intuitiva.
Tanto si busca un solo enchufe o una bombilla inteligente como si desea automatizar toda la casa, descubra lo accesible que es hoy en día la tecnología inteligente.

Embalaje

Contenido del envase

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Dimensiones del envase Caja de regalo con eurolock

Ancho Alto Largo
95 mm 95 mm 195 mm

Dimensiones logísticas

Envasado por Ancho Alto Largo Peso
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Especificaciones de los productos

Ancho 75 mm
Alto 105 mm
Profundidad 75 mm
Peso 350 g
Color Blanco
Micrófono incorporado
Corriente de Entrada 1.0 A
Tipo de fuente de alimentación Alimentado por la red
Materiales Plástico
Conector de alimentación Euro / Type C (CEE 7/16)
Funcionalidad de grabación en la nube
Altavoces integrados
Compatible con Nedis® SmartLife
Ángulo de visión 110 °
Chip de imagen 1/3" CMOS
LED 1
Accesorios Soporte de la Cámara
AC Adaptador de Enchufe de la UE
Estanqueidad IP65
Longitud de adaptador de corriente del cable 1.50 m
Máximo poder de transmición 15 dBm
Visión nocturna 15 m
Máximo alcance de transmición de antena 3 dBi
Visión nocturna por infrarrojos
Lente 2.8 mm
Cuadros por segundo 25 fps
Tipo de almacenamiento 16GB interno
Almacenamiento en la Nube (opcional)
Conexión de entrada de potencia de dispositivo DC 5.5 x 2.1 mm
Consumo máximo de energia 12 W
Resolución máxima Full HD 1080p
Ángulo de inclinación 85 °
Megapíxeles 2 MPixel
Grados Pan 355 °
Diseño de cámara Cámara PTZ
Potencia sobre soporte ethernet No
Ojo de pez No
Con sensor de movimiento
App disponible para Android™
IOS
Rango de frecuencia de transmición 2400 - 2483.5 MHz
Tensión de entrada 12 V DC
Inclinación
Regulable
Tecnología inalámbrica compatible Wi-Fi
Programable
Rango de temperatura en la que opera -20 - 50 °C
Cantidad de productos por paquete 1 uds.

Soporte

Preguntas Frecuentes

Hemos encontrado las siguientes preguntas para usted en inglés

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.